Laxtronics manufactures following Avionics products
Can test 200 lines / noddle junctions. Can be expanded upto 5000 lines «« Read More »»
Complete solid state design using integrated circuits. Replaces delicate "RPS relay" of Russian origin
Design facilitates ease of adjustment of pulse rate for optimum aerodynamic performance
«« Read More »»
550 micro Farad, 100 volts leakage current, less than 1 micro ampere at rated voltage «« Read More »»
Input voltage 22 to 36 volts, output 3.3 volts 5 volts, 6 volts, 9 volts, 12 volts,15 volts, 24 volts, 1.2 ampere «« Read More »»
10 inputs scanned and latched for fire warning with output indication and master blinker «« Read More »»
Electronics Module Replacement for RPS POLARISED RELAY, sensitivity ± 1 milli Ampere at 100 milli volts, output contact rating 3 Ampere, 27 volts DC «« Read More »»
The unit is compatible to interface with DVS pressure transmitter that send stall pre-warning frequency signal to PVS unit that analysis / computes the signal and generates corresponding stall warning signal «« Read More »»
Multiple output low noise linear power supply modules, output voltage range 5volt 5 Ampere to 24 volt 500 milli Ampere, input 200 volts AC 400 Hz, 3 phase «« Read More »»
Model EU3.215.450
Input: 27.0V DC ±10%, Output: Output 5.0V±.25V, Max Load Current 3.0A
«« Read More »»
Model EU3.215.462
Input: 27.0V DC ±10%, Output: 5V±.25V, Max Load Current 1.5A
«« Read More »»
Model EU3.215.470
Input: 27.0V DC ±10%, Output: Output 12.6 ±.63, Max Load Current 0.5A
«« Read More »»
Model EU3.215.547
Input: 27.0V DC ±10%, Output: Output -12.6±.63V, Max Load Current 1.0A
«« Read More »»
Electronic module to amplify signal from turbine sensor. Output capable to drive digital and analog indicator «« Read More »»
0.5 seconds 3 seconds delay unit to keep camera on «« Read More »»
Multiple output 5 volt 9.5 Ampere, 5 volt 9.5 Ampere, 10 volt 1 Ampere, 3 volt 3 Ampere, 24 volts 200 milli Ampere, 12 volt 200 milli Ampere, 6 volt 200 milli Ampere. Input power 27 volt DC «« Read More »»
The unit disconnects power to output and sounds Alarm under the following conditions
Over voltage DC 35 Volts ±3 Volts
Reverse DC: 0 to 60 Volts
AC 0 to 300 Volts 40 Hz to 450 Hz
«« Read More »»