For More Details Contact Us On:
♦ Address :
K-16, M.I.D.C. Ambad, Nashik, Maharashtra, India - 422 010.
♦ Telephone :
+91 253 6605121
+91 253 2385121
♦ Fax :
+91 253 6601241
♦ Email :
mail@laxtronics.com
laxtronics@gmail.com
Model EM-801 is Electrometer grade very low current measuring instrument that can measure DC current in Sub Pico amp range from 2 Milli Ampere being the highest value. . It has built in DC Source up to 1000 Volts DC that can be set to any value with a setting resolution of 1 Volt. With DC Source incorporated, the instrument can measure resistance up to 200 Tera Ohm i.e. 2 x 1014 Ohms.
Voltage Proof Tester, model: VPT-6K is equipment designed to test dielectric insulation in capacitors for its voltage withstanding capability.
Safety is of paramount importance while measuring resistance value in igniters or other explosive elements, besides ascertaining accuracy of measurement and reliable working of the instrument.
The design and performance of “Safety Ohm Meter, Model: SOM-21K” guarantees that in no circumstances it can falsely trigger the device under test. Also the tester does not impair the "System function integrity of the units under test" in which the igniters or explosive elements are installed, should the testing is performed in situ.
Safety Ohm Meter model SOM-20K is reliable instrument designed to make safety inherent for carrying out resistance measurement of explosive / volatile devices like squib resistance, ignites, detonators, cartridges for firing ejection seat and many other similar devices.
Model HIR-701 has an application in measuring and testing Meg Ohm values in electrical/electronic components like Plastic Film Capacitors, Cables, Connectors, Electrical insulating oil, Semiconductor device, Switches, Transformers, Motors and insulating material. It can measure insulation resistance in the range of 1 Meg Ohm to 100 Tera Ohms in seven selective ranges.
Mega Ohm Range - 100 Kilo Ohm To 100 Tera ohms, Leakage Current 10 Milli Ampere To 1 Nano Ampere, Test Voltage 10 Volts DC To 1000 Volts
Model HIR-501 is designed to meet the requirements in measurement of insulation resistance and leakage current in wide range of application. Whether manufacturing of domestic appliances or industrial equipment is concerned, the components to be tested are capacitors, transformers, cables and numerous types of sub-assemblies and finished products. Often raw materials, which make insulating sheets and moulds, are also to be tested prior to its use.
Mega Ohm Range - 1 Mega Ohm To 100 Tera Ohms, Test Voltage 100 Volts DC To 2500 Volts
High Voltage Break Down Tester, Model HV-10K2 is designed to meet testing requirements of dielectric strength tests in various electrical gadgets, appliances, components and electrical insulating material used or manufactured in industries.
DC Output:0 to 10 Kilo Volts continuously variable, AC Output:0 to 5 Kilo Volts continuously Variable, Current Limit:0 t
5 Kilo Volt AC, 5 Kilo Volt DC, 30 Milli Ampere, Timer 0 To 100 Seconds, HV Prods, Start-Stop-Trip-Reset Using Single Switch On The Test Prods. Start Function Apply Test Voltage From 0 To Set Voltage Gradually
5 Kilo Volt AC, 30 Milli Ampere, Timer 0 To 100 Seconds, HV Prods, Start-Stop-Trip-Reset Using Single Switch On The Test Prods. Start Function Apply Test Voltage From 0 To Set Voltage Gradually
Output Voltage:0 to 3 KV DC Hz Setting Variable Using Autotransformer On Front Panel. Readout:Analogue Meter With Scale length 90 mm. Resolution:100 Volts. Accuracy: ± 5% Of FSD
Digital insulation tester Model No: DIT-1020 is designed to carry out electrical insulation measurement in delicate or sensitive electronic sensors, transducers, modules and assemblies with test voltage of 100 Volts DC, its short circuit current is less than 500uA.
Digital insulation tester Model No: DIT200M is designed to carry out electrical insulation measurement in delicate or sensitive electronic sensors, transducers, modules and assemblies with test voltage from 1 to 30 Volts DC, its short circuit current is less than 100uA.
1 Micro Ohm To 20 Kilo Ohms, Test Current 1 Ampere To 1 Micro Ampere
Input Voltage 220 V, 50 HZ, 1 PH
Resistance Range - 1 Ohms To 10 Mega Ohms, Test Current 75 Milli Ampere To 7.5 Micro Ampere. Analog Readout With Continuity Buzzer
0.1 Micro Farad To 200,000 Micro Farad, Test Frequency 120 Hz, Tan-D 0.01 To 100% Readout Digital
0.01 Seconds To 999.99 Seconds, Start-Stop Function Actuation 5 Volt DC To 36 Volt DC, 10 Volt AC To 230 Volts AC
Capacitance 100 Pico Farad To 200 Micro Farad, Tan-D 0.0001 To 0.01 (0.01% to 1.0%), Test Frequency 120 Hz And 1000 Hz
0.1 Micro Farad To 100,000 Micro Farad, Test Frequency 120 Hz
Current Sensitivity ± 10 Nano Ampere Resolution 0.2 Nano Ampere, Input Resistance 10 Kilo Ohms, Readout Analog Meter 100 Milli Meter Scale, Operating Power 3 Volt Dry Battery
10 Kilo Volt AC, 30 Milli Ampere, Timer 0 To 100 Seconds, HV Prods, Start-Stop-Trip-Reset Using Single Switch On The Test Prods. Start Function Apply Test Voltage From 0 To Set Voltage Gradually
Test Voltage 200 Volts To 1000 Volts AC 50 Hz Line Utility Power, Tan-D 0.0001 To 0.01 Analog Readout
Test Voltage 0 To 1800 Volts DC, Discharge Time Counter 0 To 300 Seconds
Temperature 0o Centigrade To 60o Centigrade, Humidity RH 10% To 99% Digital Readout
Capacitance 0.1 Micro Farad To 200,000 Micro Farad, Leakage Current 1 Micro Ampere To 2 Ampere, Test Voltage 0 To 450 Volts DC, Provision To Discharge The capacitor Readout Digital
0 To 4000 R.P.M. i.e. 0 To 120% (100% R.P.M. = 2500 R.P.M.) Or As Per Requirement.
Model LX-PE259 is meant for checking of functionality of DP-110 sensor of aero engine. DP-110 is an Induction type position sensor and converts angle into electrical signals.
The Equipment is specially designed to carry out insulation resistance measurement in plastic film capacitors besides it is well suited to carryout testing characteristic of material, components, devices, and sensors for its electrical insulation resistance and Leakage current.
Digital insulation tester Model DIT-20T is designed to meet the requirements in measurement of insulation resistance in wide range of application.
Digital insulation tester Model No: DIT-1020 is designed to carry out electrical insulation measurement in delicate or sensitive electronic sensors, transducers, modules and assemblies with test voltage of 100 Volts DC, its short circuit current is less than 500uA.
Digital insulation tester Model No: DIT200M is designed to carry out electrical insulation measurement in delicate or sensitive electronic sensors, transducers, modules and assemblies with test voltage from 1 to 30 Volts DC, its short circuit current is less than 100uA.
Spring Loaded Test Prods Suitable To Contact Aluminum Frame With Manual Force. Test Current 2 Ampere
To 2 Micro Ampere, Resistance Range 200 Micro Ohms (0.1 Micro Ohm Resolution), To 2000 Ohms, Compact portable Unit
Product Function Test Equipments Are Customized Test Equipments To Enhance Production, Testing And 100% On Device/Product Produce. These Are Rugged Design That Can Stand Overloads Like Short Circuit/Open Circuit Electric Charged Components, Sorting.
1.5 Volts 1050 D Type Dry Cells Or Equivalent, Quantity 2. Piezo Sounder 1.2 KHz Approximately 60 dB Output Current 400 mA DC ± 100 mA. Sound/LED Indicator For Continuity Unit Can With Stand 230 Volts Overload From Test Points Without Destruction
To Protect 27 Volt DC Operated Testers From 230 Volts AC/ 100 Volt AC/ 36 Volts AC/ High Voltage DC > 32 Volts And < 18 Volts
Twenty Capacitors Can Be Cleared At A Time. Power Full To Clear Total 'C' Value Upto 400 µFD
Testing Of Electrically Operated Appliances
Range 10 UH To 10 HENERY
Range: 100 Kilo Ohms To 11.111 Giga ohms 1000 DC Max Or 750 volts AC 50 Hz Max
10 Ohm Minimum To 11.1111 Meg Ohms maximum
19999 Pico Amp-1 Pico Amp Resolution, 199.99 Nano Amp-10 Pico Amp, 1.9999 Micro Amp-100 Pico Amp,19.999 Micro Amp-1 Nano Amp, 199.99 Micro Amp-10 Nano Amp.
Range 0 To 199.9 Amp, 0 To 1.999 Amp, 0 To 19.99 Amp, DC, AC 50 Hz, 400 Hz Switch Able, Sine-Wave
DC Output:0 To 10 Kilo Volts continuously variable, AC Output:0 To 5 Kilo Volts continuously variable, Current Limit:0 t
Our MRO Activity Is Confined To Repair, Modification, Overhauling And Calibration Of Aircraft Line Replaceable Units. Also We Undertake Maintenance, Repair, Overhaul And Calibration Of Ground Test Equipment.
Note: All Fields are required.
Subscribe to our newsletter and we will inform you about newest projects and promotions.
©2024. All Rights Reserved | Design by Laxtronics